Porter Cable - 1/2 In. 1/4 In. Shank Rabbeting Router Bit With Bearing
Use this bit for routing rabbets and lap joints. The bearing guides the bit, controlling the cut. Project uses include cabinet doors, inlays, drawer faces and inset doors. Use in handheld and table-mounted routers. Constructed with MONSTER CARBIDE. 40 percent thicker carbide than on standards bits. Resulting in a stronger, longer lasting bit. Better heat and force distribution. Generates less friction, runs cooler. Provides smoother cuts. Allows faster feed rates. Can be resharpened more times than standard carbide. Tips For Using This Bit: The depth of rabbet is equal to the distance between the bearing and the bit?s cutting edge. Change the bearing size to change the depth of rabbet. To make wider rabbets, remove the bearing and use an edge guide or fence. To minimize tear-out and chip-out, make a shallow first pass, followed by a deeper second pass. Never bottom out the router bit in the collet. Leave about 1/8 In. clearance to allow the collet to tighten properly.
Related Terms used to find this item - 1/2 In. 1/4 In. Shank Rabbeting Router Bit With Bearing Tools & Hardware Power Tool Accessories Router Bits Forming
| 
Save to del.icio.us